Engineering Specification, 1000 ton Horizontal Extrusion Press (O/No. 58090)
1000 ton Horizontal Extrusion Press (O/No. 58090)
This page contains a précis of the Engineering Specification for the press stated above (as originally supplied).
Click here to see photographs of this press.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 1000 ton self-contained direct-pumped horizontal extrusion press | ||||
Process: | Extrusion of copper and brass solids | ||||
Power | Diameter | Stroke | Speed | ||
Main Characteristics: | Main ram total power and stroke | 980 tonf | 25″ | 5′ 0″ | 0 – 1.05 in/s |
Approach rams total power and stroke | 40 tonf | 3 5/8″ | 5′ 0″ | 14″ | |
Drawback rams total power and stroke | 216 tonf | 11′ 1/2″ /8″ | 5′ 0″ | 12.5 in/s | |
Container sealing power and stroke | 100 tonf | 11′ 1/2″ /8″ | 3′ 6″ | 10 in/s | |
Container unsealing power and stroke | 100/200 tonf x 3′ 6″ | 11 1/2″ | 3′ 6″ | 10 and 5 in/s | |
Container liner bore | 5 1/8″ | ||||
Billet size | 5″ x 24″ long | ||||
Container Heating: | Thermostatically controlled induction heating up to 450 degrees C | ||||
Die Assembly: | Horizontal sliding type with pneumatic clamps for alternative method of sawing and discard ejection | ||||
Columns: | Four 8″ dia. | ||||
Column Centres: | Centres 3′ 4″ x 3′ 4″ | ||||
Overall Dimensions: | 32′ 6″ x 13′ 0″ x 6′ 9″ at floor level | ||||
32′ 6″ x 13′ 0″ x 11′ 0″ at platform level | |||||
Total weight of the press; | 65 tons including pumps, motors, piping, etc. | ||||
This specification was kindly supplied by Rhodes Interform
No Comments
Add a comment about this page