Engineering Specification, 100 ton Furnace Pusher Unit (O/No. 6220/55)
100 ton Furnace Pusher Unit (O/No. 6220/55)
This page contains a précis of the Engineering Specification for the machine stated above (as originally supplied).
Click here to see a photographs of this machine.
If you have any comments, please leave your memories at the bottom of the page by clicking on the words Add a comment about this page.
Specification: | 100 ton hydraulic furnace pusher unit | |
Main Characteristics: | Power | 100 tonf |
Normal charging stroke of cylinder assembly | 7′ 0″ | |
Additional withdrawal stroke of pusher head (i.e. length of loose distance piece | 3′ 1″ | |
Total stroke of pusher head and guide framework | 10′ 1″ | |
Width of pusher head | 15′ 0″ | |
Width of guide frameworks | 6′ 6″ | |
Approx. overall length of framework and pusher head assembly | 25′ 6″ | |
Height of working face of pusher head | 8″ | |
Effective depth of pusher head | 1′ 10″ | |
Working Pressure: | 3500 psi | |
Medium: | Oil | |
Supply Tank Capacity: | 1000 gal | |
Pumps: | Two – Fraser Mono-Radial pumps, type OLS25, each delivering 25 gal/min | |
Two – Fraser Deri-Sine pumps, type S/8 – 2H/T | ||
One – Fraser pump, type OLS25 (standby pump) | ||
Plus all necessary control valves and piping | ||
Speeds of operation: | Forward stroke at low pressure | 31′ 0″/min |
Forward stroke at high pressure | 15.4′ 0″/min | |
Return stroke | 51′ 0″/min | |
This specification was kindly provided by Rhodes Interform
No Comments
Add a comment about this page